Battery replacement for your Cecotec Conga 1690, 1890, 2090, 2290 Panoramic and 2690, 3090, 4090, 5090, 6090 and 7090. BAKUUM exclusive.

Bateria
April 30, 2024
MARIA MARTINEZ

Cambiar batería para tu Cecotec Conga 1690, 1890, 2090, 2290 Panoramic y 2690, 3090, 4090, 5090, 6090 y 7090. Exclusivo BAKUUM.

If you own a Conga 1690, 1890, 2090, 2290 Panoramic, and 2690, 3090, 4090, 5090, 6090, and 7090 and have noticed that the battery no longer performs as it used to, it may be time to replace it. Fortunately, replacing your Conga's housing battery is a relatively simple process. In this step-by-step guide, we will show you how to change your Conga's battery so you can enjoy optimal performance from your robot vacuum cleaner once again.

Step 1: Preparation Before you begin, make sure you have a compatible replacement battery for your Conga 6090. Turn off the Conga and disconnect it from the power source. Locate the battery compartment on the bottom of the housing.

Step 2: Unscrew the plastic part that holds the cables.

Step 3: Remove the battery from inside the housing.

Step 4: Cut the old battery cable, leaving about 5cm of margin from the solder on the board.

Step 5: Strip the 2 terminals of the housing cable and the 2 terminals of the new battery. Insert the heat-shrink tubes into each cable.

Step 6: Twist the stripped wires together to create a connection. It is recommended to solder the connections to secure them.

Step 7: Lay the connection flat and slide the heat-shrink tube over the connection.

Step 8: Heat the heat-shrink tube with a lighter or heat gun to create a secure connection.

Step 9: Pass the cables through the output slot and screw the retaining piece back in.

Step 10: Charging the New Battery
With the battery replaced, it is recommended to fully charge it before using your Conga again.

Step 11: Once the battery is fully charged, disconnect the Conga from the power source and perform a test to ensure everything is working correctly. You are now ready to enjoy your Conga with a renewed battery and optimal performance!

Changing your Conga's housing battery is a process you can do yourself. By following these simple steps, you can once again enjoy optimal performance from your robot vacuum cleaner. Remember to use a compatible replacement battery and follow the manufacturer's instructions. Enjoy a renewed Conga ready to keep your home clean.